skirtingmatchBasket

Blog

Skirting and architrave jobs to finish before Christmas

By A Woods ·

A Victorian hallway with painted skirting and a decorated Christmas tree in warm light

The short answer: fix the small things that show, and leave the big jobs until January. A missing length, a damaged section or an unfinished joint is worth doing before guests arrive. Work back from the day you want it finished: allow for the match, the milling (5–7 working days, new cutter or not), delivery, fitting and a day for the paint to dry.

Which skirting jobs are worth finishing before Christmas?

A house gets looked at harder in December. The lights are on, the rooms are full and the hall is the first thing anyone sees. A short list of skirting and architrave jobs makes a real difference to how a house reads, and most of them are small:

  • A gap where a length is missing, for instance where a radiator, a cupboard or a fireplace used to be.
  • One damaged or rotten section that you have been painting round since the summer. A short length can be cut out and replaced without touching the rest of the room.
  • An unfinished joint, where a repair or an extension never got its last coat of caulk and paint.
  • Architrave round a new door that was hung but never trimmed.
  • Scuffs and chips on the lengths everyone walks past, which a day with filler and a brush will fix without any new timber.

Which jobs should wait until January?

A whole room of new skirting, a new cutter for a profile that is not on any shelf, or anything that needs the plasterer back first. Rushing those leads to a poor finish, and the house is not at its best with half the skirting off anyway. If a job needs a plasterer, a floor refit or a new profile, put a firm date in January and enjoy December.

How do you work back from the day you want it done?

Count backwards from the day the room needs to be finished, and write each step down:

  1. Finished and dry. Leave a day or two for the paint to cure, more if the house is cold.
  2. Fitted, filled and painted. A single room can often be done in a weekend; a hall with architrave takes longer.
  3. Delivered. Timber needs a couple of days in the house to settle before it is fitted.
  4. Milled. 5–7 working days for a library profile. A profile that is not one of our existing profiles needs a new cutter first; it is still delivered in 5–7 working days from the day your sample reaches us or you approve our drawing of your trace.
  5. Matched. A traced or posted section is read within one working day of arriving, and for a posted sample you need to allow for the post itself.

We have not set Christmas cut-off dates on this page, and these are lead times, not guarantees of delivery by a given day. If the date matters, start early in December, and say so when you send your trace.

What is the quickest way to get a match?

Get a cut end of the old board to us as early as you can. Trace it on our A4 trace sheet with a loyalty or gift card beside it and upload it on the scan page - no offcut to post, even if you have one. A photo of the front of the board cannot give us the section, and sending one first only adds a round of emails.

Questions

How long does it take to get skirting made to match before Christmas?

Library profiles are milled to order in 5–7 working days. If yours is not one of our existing profiles, a new cutter is ground to your section and the boards are milled and delivered in 5–7 working days from the day your sample arrives or you approve our drawing of your trace. Add time for posting, delivery and painting, and start early in December rather than late.

Is it worth fixing skirting before guests come for Christmas?

Small jobs, yes: a missing or damaged length, a gap at a door lining or an unfinished joint are what people notice in a full, well-lit house. Big jobs, such as a whole room of new board, are better left until January than rushed.

Can I match a short length of skirting in time?

Often, if you can get a cut end of the old board to us early. A trace or a posted offcut gives us the section; a photo of the front of the board does not.

Next: more from the blog · How to match an old skirting board

Written by A Woods at SkirtingMatch. Photographs on this blog are illustrations, not customer jobs.

We match any skirting, architrave or profile, as close to yours as it can be cut. Choose from our existing profiles, or we grind a cutter for yours. Delivered in 5–7 working days.