The short answer: Trace one cut end of every moulding type in the building. Read each section in true millimetres, match it to a cutter we already hold or have one ground to your section (delivered in 5–7 working days), and mill the whole job from that one set of cutters. The cutters stay on file, so later phases match the first. Trade accounts start at 100m across every moulding on the job.
Why does a whole-building job go wrong?
Because mouldings get ordered room by room, from photos and catalogue names. Profile names are not a standard: one supplier's “ogee” is another's “Victorian”. Three rooms in, the hall, the landing and the stair do not quite agree, and nobody can say which board is the odd one out. A moulding matches when its measured section matches, so the job has to be specified from sections, once, up front.
How do you specify mouldings for a full-house renovation?
- Walk it and list the types. Skirting, architrave, dado rail, picture rail and coving can each change between floors, and between the front of a house and the back. Note where each one runs.
- Get one clean cut end of each. A hand-width piece (about 100mm) from a cupboard, a stair string, a radiator recess or a board you are taking off anyway. A photo of the front face cannot give the section.
- Trace or post each one. Draw round the end on our A4 trace sheet with a loyalty or gift card beside it for scale, then photograph it from straight above. Or post the offcut itself. See how to match an old skirting board for the detail.
- Approve one drawing per moulding. We read every section in true millimetres and send back a drawing to sign off. That drawing is what the architect, the contractor and the joiner all work from.
- Order the job together. One order across every moulding, from one set of cutters, with heights and lengths set per room.
What do architects and specifiers need to know?
Specify the moulding by its drawing and its timber, not by a trade name. We make skirting, architrave, dado rail and picture rail in solid pine or solid oak, to the height you draw. One of our existing profiles can be milled at a height we do not stock without a new cutter, because the cutter only shapes the top section.
Trade accounts are set up by a person, by email. They start at 100m per order across every moulding on the job, in 4.2m lengths, delivered for £50 (Scotland £55, Highlands & Islands £81.48). The timber is 20% off from 100m, and cutter discounts of up to 50% are agreed for your account. Open a trade account.
How do you match mouldings in an old hotel?
An old hotel is a house renovation with more corridors. Buildings that have been converted, extended and refitted across a century usually hold several generations of the same moulding: the original ground-floor board, a later extension that nearly matched it, and a 1980s replacement that did not. The work is the same as for a house, only longer:
- Trace by zone, not by room. Pick a representative cut end from each period of the building: the original public rooms, the upper floors, the later wing.
- Keep every profile on file. Each traced section becomes its own cutter with its own drawing. Refurbish floor by floor and the next floor is cut from the same shape as the last.
- Plan the lengths. 4.2m boards are fine in a corridor and awkward on a tight stair or in a small lift, so say how they will be carried in and we can talk through it before you order.
- Phase it. Order what the current phase needs now. The cutters stay on file for the next one.
- Tell us any specification up front. If the brief needs anything beyond profile, timber and height, such as a particular finish or certification, ask at the start and we will say plainly what we can and cannot supply.
Can you match mouldings in a central London building?
Yes. Central London hotels, townhouses and converted offices are usually Georgian, Victorian or Edwardian fabric with later alterations, which is exactly what a trace is for. We work from the cut end of what is on site and send the timber in 4.2m lengths on a trade account. If a profile is not one of our existing profiles, a bespoke cutter is ground to your section, delivered in 5–7 working days.
Questions
How do you match skirting and architrave across a whole house?
Take a trace or a cut end of each moulding type (skirting, architrave, dado, picture rail), read each section in true millimetres, match it to an existing cutter or grind a new one (delivered in 5–7 working days), then mill the whole job from the same set of cutters so every room and every phase agrees.
Can mouldings be matched for a listed or period building?
Yes, from the building's own cut ends. We match the section that is there. Whether consent is needed for the work is a question for you and the conservation officer; we supply the drawing and the timber.
Can you match the plasterwork or timber mouldings in an old hotel?
We match timber mouldings: skirting, architrave, dado rail and picture rail. Hotels usually hold several generations of profile in one building, so each is traced separately and kept on file as its own cutter.
What is the minimum order for an architect or contractor?
Trade accounts start at 100m per order across every moulding on the job, in 4.2m lengths, delivered for £50 (Scotland £55, Highlands & Islands £81.48). The timber is 20% off from 100m, and cutter discounts of up to 50% are agreed per account.
What happens if we need more of the same moulding later?
The cutter stays on file, so the next phase, the next floor or a repair in three years is cut from the same shape.
Next: Trade accounts for architects & specifiers · How to match an old skirting board · Skirting board profile names