skirtingmatchBasket
Bullnose skirting board profile, illustrated render of a primed board — Modern

Bullnose skirting board

Moulded depth 9mm · board thickness 18mm

A full quarter-round shoulder. Friendly, tough, and easy to live with in busy hallways.

Board height

Not sure which height is yours? Scan the board — it measures to ±1mm.

Need a height that isn't listed? Pick Custom… above — same curve, your exact stock size, handled as a bespoke run.

Sheet 03 · SpecificationBullnose · Modern
Stock heights
95 · 120 · 145 · 170 · 195 · 220 mmmilled to order
Moulded head depthKey
9 mmthe figure that decides the match
Stock depth
18.0 mmboard thickness
Material
Solid pinesanded, unfinished
Price at 95mm
£18.00/mrange £18–£36/m
Max length
2.4 mtolerance ±1mm
Lead time
5–7 working daystracked delivery
Matching architrave
Length needed
5.0 m

Supplied in lengths up to 2.4m. Orders over 2.4m are supplied as multiple lengths.

£18.00 per linear metre£90.00

Milled to order in solid pine, 5–7 working days. Delivery £12.00, free over £150.00. Prices are confirmed on your emailed payment link before anything is charged.

How to tell if yours is Bullnose

Look at a cut end, not the face: the face hides the depth of the section. Read it where the paint is thinnest.

  • The top edge is one full, soft quarter-round shoulder, visible from across the room.
  • The round runs 9mm down from the top edge on our cutter, then the face goes flat.
  • There are no fillets (small flat steps) above or below the curve.
  • Common in modern builds and busy hallways, where a soft edge takes knocks well.

Names are only labels: two boards sold as “bullnose” can need different cutters. The scanner compares your measured section, to ±1mm, against this cutter and every other one on the rack.

Often confused with

Pencil round is a much smaller radius (3mm): a softened corner, not a shoulder.

An ovolo's quarter-round sits between two square fillets; a bullnose has none.

More names, side by side: Skirting board profile names · Modern skirting boards

Matching architrave

Bullnose is also milled as architrave in the same solid pine: 57mm at £14.00/m, 70mm at £16.00/m and 95mm at £18.00/m. Pick a width above and it is added alongside your skirting.

Not quite yours?

We match any skirting board. Guaranteed. Either your profile matches a cutter in our library, or we grind a bespoke cutter for it in 7 days.